Welcome to Yongkang Bochao Industry & Trade Co.,Ltd. official website!

Bochao recommended kitchen magical non-stick pot, bid farewell to the era of smoke

Date: 2018/4/13 Browse: 6422
Back

Non-stick pans, as the name suggests, are cooking pots that won't stick when cooking. Regardless of the level of cooking, stick pans are quite a headache for people, so the artifact of the non-stick pan was born. His advent brings great convenience to people's lives. People don't have to worry about scorching meat when they are careless, and fried tofu is not afraid of breaking into tofu.

The principle of non-stick pans is to apply a non-stick coating to common pans to achieve a non-sticky, easy-to-clean effect. Teflon coating and ceramic coating are common, and the former is a chemical coating. Although it is widely used nowadays, if it is used improperly or there is a problem with the quality of the purchased product, it will still cause health problems; while the latter ceramic performance Stability, and after thousands of years of use testing, has fully demonstrated its safety. The use of nanotechnology makes the surface of the product tight and non-porous, achieving a non-stick effect.

The use of non-stick pans has brought us a lot of convenience. However, compared with iron pans and stainless steel pans, non-stick pans contain certain chemical coatings. Therefore, special care must be taken when purchasing and using them. When purchasing, pay attention to the following aspects: First, the appearance quality, the non-stick coating inside the pot should be smooth, color, hiding power, gloss should be basically uniform, no bubbles, no fall off, also requires the coating should be completely hot melt, no Visible defects such as dirt, cracks, and explosions. Second, we must look at the thickness of the pot material. The pot material should be aluminum or aluminum alloy material. Third, the thickness of the coating must not be visible, and the national standard requires the average thickness of the frying pan and frying pan to be greater than or equal to 25 micrometers. In addition, the non-stick pan needs to be surface-blasted before coating to increase the surface roughness and increase the surface roughness. Large adhesion, thereby increasing the attachment fastness and scratch resistance.